Polyform G5 Fender, Cobalt Blue, 8.8 x 26.8 in
- Brand:
- Polyform
- Part no:
- 12964872
Where to buy
Specifications
- Diameter x length
- 8.8 in x 26.8 in
The Polyform G5 is a utility fender from the G Series, with a molded-in ribbed body in Cobalt Blue. It measures 8.8 inches across and 26.8 inches long, and the eye is 3/4 inch in diameter. The ropehold area is reinforced and the finish is blemish-free. Each fender is inflated and tested at the factory, and the G5 carries an inflation valve so you can set the firmness. Polyform describes its fenders as having even wall thickness with no thin spots or voids.
Our take
The inflation valve on the G5 means you can set firmness to suit the dock or the load, rather than living with whatever it shipped at. Pair that with the reinforced ropehold and the 3/4 inch eye, and the tie-off point is built for strain.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.
