Polyform G4 Fender, Teal, 6.5" x 22"
- Brand:
- Polyform
- Part no:
- 04954067
Where to buy
View on Amazonpaid link
Sand
View on Amazonpaid link
Specifications
- Diameter x length
- 6.5" x 22"
- Valve
- Inflation valve
The Polyform G4 is a teal utility fender, 6.5 inches across and 22 inches long. It belongs to the G Series, and the area around the rope hole is reinforced. The G4 is one of the sizes fitted with an inflation valve, so you can adjust how firm it is. Each fender is inflated and tested individually at the factory before it ships.
Our take
The inflation valve on the G4 lets you adjust how firm it is, so you can set how much it gives. The reinforced rope hole area gives the line a stronger point to load.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.
