Polyform G-5 Twin Eye Fender, 8.8 x 26.8 in, Black
- Brand:
- Polyform
- Part no:
- G-5-BLACKWO
Image: lifeofsailing.com
Where to buy
Specifications
- Diameter x length
- 8.8" x 26.8"
- Maker's boat length
- 25' - 35'
- Eye diameter
- 0.75 in
The Polyform G-5 Twin Eye is a black utility fender measuring 8.8 by 26.8 inches, with a volume of 5.1 gallons. It is made in one piece with even wall thickness and ribs molded into the body for strength and abrasion resistance. Reinforced ropeholds with 0.75 inch eyes let it hang vertically or horizontally. Polyform lists it for boats from 25 to 35 feet, and for trailered boats and protected permanent moorings.
Our take
Twin eyes on the G-5 mean it can hang vertically or lie horizontally along the hull, and the molded-in ribs add resistance to abrasion. At 8.8 by 26.8 inches, it is sized by the maker for boats of 25 to 35 feet.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.
