Polyform G-3 Twin Eye Fender 5.5" x 19", Black
- Brand:
- Polyform
- Part no:
- G-3-BLACKWO
Image: lifeofsailing.com
Where to buy
Specifications
- Diameter x length
- 5.5" x 19"
The Polyform G-3 is a twin-eye utility fender in black, 5.5 inches in diameter and 19 inches long. It is made as a single piece, with an even wall thickness that the maker ties to strength and a long service life. Ribs are molded into the body to help it resist abrasion, and the ropeholds are reinforced to give secure attachment points. With two eyes, it can be hung vertically or horizontally.
Our take
The G-3's molded-in ribs are there to resist abrasion, and the even wall thickness is meant to add strength. That points to a body built to take rubbing against a dock, and the two eyes let you hang it vertically or horizontally.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.
