Polyform G2 Fender, Teal, 4.5" x 15.5"
- Brand:
- Polyform
- Part no:
- 24609402
Where to buy
Specifications
- Diameter x length
- 4.5" x 15.5"
This is the Polyform G2 fender in teal, 4.5 in across and 15.5 in long. It is part of the G Series, a utility fender line, and it comes inflated and individually tested at the factory. The ropehold area is reinforced and the finish is described as blemish-free. Valves for adjusting firmness are fitted only to the four largest G sizes, so the G2 has none.
Our take
The G2 is 4.5 in across and 15.5 in long, and the maker puts inflation valves only on the four largest G sizes, so this one comes factory inflated with no firmness adjustment. Its ropehold area is reinforced, which is where the line attaches.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.
