Polyform G5 Fender, Blue, 8.8" x 26.8"
- Brand:
- Polyform
- Part no:
- 74434019
Where to buy
Specifications
- Diameter x length
- 8.8 in x 26.8 in
The Polyform G5 is a utility fender from the G Series, molded with a ribbed finish. It measures 8.8 inches across and 26.8 inches long, with a 3/4 inch eye for the line. The ropehold area is reinforced, and Polyform inflates and tests each fender at the factory. The G5 is one of the larger sizes in the range that carries an inflation valve, so you can set how firm it is.
Our take
The 3/4 inch eye is reinforced around the ropehold, which is the spot a fender line works hardest. The inflation valve on the G5 lets you run it firmer or softer to suit the dock and the load you put on it.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.
