Polyform HTM-1 Fender, Blue, 6.3" x 15.5"
- Brand:
- Polyform
- Part no:
- 10377440
Image: Fisheries Supply
Where to buy
Specifications
- Diameter x length
- 6.3" x 15.5"
The Polyform HTM-1 is a blue fender, 6.3 inches in diameter and 15.5 inches long, with 15 lbs of buoyancy. At 6.3 inches it has the smallest diameter in the HTM series. A center rope tube lets you hang it vertically or horizontally, and reinforced tube ends keep a line from pulling through. Vertical ribs and extra wall thickness add strength, and the 5/8 inch eye takes 1/2 inch line.
Our take
At 6.3" x 15.5" the HTM-1 has the smallest diameter in its series, with 15 lbs of buoyancy. The center rope tube lets it hang either way, and the reinforced tube ends keep a line from pulling through.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.
