Polyform HTM-3 Boat Fender, Blue, 10.5 x 27 in
- Brand:
- Polyform
- Part no:
- 03088059
Image: Powerboat Supply
Where to buy
Specifications
- Diameter x length
- 10.5 in x 27 in
The Polyform HTM-3 is a blue fender measuring 10.5 inches across and 27 inches long. A rope tube runs through the centre, so it can hang vertically or horizontally. The tube ends are reinforced to keep lines from pulling through, and the body has vertical ribs and extra wall thickness. The eye is 5/8 inch and takes 1/2 inch line.
Our take
The center tube with reinforced ends lets the HTM-3 hang either way up without the line pulling through at the opening. The 5/8 inch eye taking 1/2 inch line is the size to match when choosing rope.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.
