Polyform HTM-2 Black Fender, 8.5 x 21.6 in
- Brand:
- Polyform
- Part no:
- 84065681
Image: Powerboat Supply
Where to buy
Specifications
- Diameter x length
- 8.5 in x 21.6 in
The Polyform HTM-2 is a black tube fender measuring 8.5 inches across and 21.6 inches long. A rope tube runs down its centre, so you can hang it upright or lying flat, from the topsides or off the dock. The tube ends are reinforced so a line is less likely to drag through if the fender jams in a tight gap. Ribs along the body and added wall thickness give it strength, and it provides 37 lb of buoyancy. The eye takes a 1/2 inch line.
Our take
The 37 lb of buoyancy in this 8.5 by 21.6 inch tube fender is the number to weigh against your boat, and the centre rope tube means you can hang it upright or flat. The eye takes a 1/2 inch line, so size your fender whip to that.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.
