Sierra 18-3306 Neoprene Impeller
- Brand:
- Sierra
- Part no:
- 18-3306
Where to buy
Specifications
- Material
- Neoprene
- Blades
- 12
- Outside diameter
- 2.25 in
- Depth (width)
- 1.9375 in
- Shaft
- 0.75 in
- Drive
- Spline
The Sierra 18-3306 is a neoprene water pump impeller made for marine use, in fresh water and salt water. It has 12 fins and a spline drive, and it fits a 3/4 inch shaft. The figures that matter when you compare it with what is in your pump: outside diameter is 2-1/4 inches and depth is 1-15/16 inches. It is listed as a replacement for Johnson Pump 09-812B. Measure your old impeller and check its number against 09-812B before you order, since diameter, depth, shaft size and fin count all have to match.
Our take
This suits anyone whose pump takes the Johnson 09-812B size and who wants a straightforward neoprene replacement for fresh or salt water. Do not buy it on the number alone: confirm the 2-1/4 inch diameter, 1-15/16 inch depth and 3/4 inch spline shaft against your old impeller first. If your pump is a different size, this is the wrong part.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.
