Sierra 18-3060 Water Pump Impeller
- Brand:
- Sierra
- Part no:
- 18-3060
Image: www.wholesalemarine.com
Where to buy
Specifications
- Material
- Neoprene
- Blades
- 12
The Sierra 18-3060 is a water pump impeller made of neoprene, with 12 fins. It is listed for use on Ford engines. It replaces Crusader 22212 and 1003026, and it is cross-referenced to Sherwood 9959 and OMC 3854286. Those numbers are the quickest way to match it to the impeller you already have. Check diameter, depth and drive against the old impeller before you order, since the part number alone will not tell you whether it fits your pump.
Our take
This suits an owner whose pump already carries one of the Crusader, OMC or Sherwood numbers above and who wants a neoprene 12-fin replacement. Skip it if your pump is something else and you are going on the Sierra number alone. Fit depends on diameter, depth and drive, so hold the new impeller against the old one first.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.
