Skipper's Locker

Quicksilver 8M0135803 Water Pump Impeller

Brand:
Quicksilver
Part no:
8M0135803

Where to buy

Specifications

Pumps it fits
Mercury 15 and 20 HP EFI FourStroke outboard water pump, serial 0R833820 and above

The Quicksilver 8M0135803 is a water pump impeller for Mercury 15 and 20 HP EFI FourStroke outboards. It is the impeller for the engine's water pump, the part you replace when the pump needs servicing. What matters when choosing one is fitment. This impeller is listed for 15 HP and 20 HP EFI FourStroke engines with serial number 0R833820 and above, and the fitment is given as 2017 and newer where specified. The manufacturer part number is 8M0135803, also written 47-8M0135803, and the UPC is 745061029514. Match those numbers against your engine before you order, and confirm the impeller is correct for your specific Mercury 15/20 HP EFI FourStroke.

Our take

This suits an owner of a Mercury 15 or 20 HP EFI FourStroke with a serial number of 0R833820 or higher who wants the matching Quicksilver impeller. Skip it if your serial number is lower or your engine is a different model. The main limit is fitment: the serial range is the only fitment detail given, so check your engine's serial before buying.

From our buying guide

The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.

Check before you buy:

  • It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
  • You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
  • The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.

See all impellers

Sources