Jabsco Quiet Flush E2 Marine Toilet, Raw Water, 24V DC
- Brand:
- Jabsco
- Part no:
- 38245-4194
Image: Fisheries Supply
Where to buy
Specifications
- Flush
- Electric
- Flush water
- Raw water
- Voltage
- 24V
- Macerator
- Yes
- Footprint
- 14.4"H x 14.8"W x 18.9" D
This is the 24V DC raw water version of Jabsco's Quiet Flush E2 electric marine toilet, with a regular bowl measuring 14.4"H x 14.8"W x 18.9" D. It weighs 38.6 lb and has a recommended fuse size of 15A. The base rotates to the left, right or rear. In eco mode it uses 1 litre (1 quart) per flush. A quick-release system gives you access to the macerator pump with no tools.
Our take
Eco mode uses just 1 litre (1 quart) per flush, and the quick-release system lets you reach the macerator pump without tools. At 38.6 lb with a regular bowl, check your head compartment against the 14.4"H x 14.8"W x 18.9" D size.
From our buying guide
A vessel with installed toilet facilities must have an operable marine sanitation device that is labeled or certified. EPA says untreated sewage may not be discharged within three miles from shore, and in a No Discharge Zone treated sewage may not be either.
Check before you buy:
- You have what it needs, since heads may call for 12-volt power, through-hulls and seacocks, or a separate vacuum source.
- It fits the compartment, since Jabsco says an electric toilet needs more space at the rear than a manual one.
- If it could sit below the waterline, you'll fit a vented loop as the maker specifies, since Jabsco warns the vent, not the loop, is what stops the siphon.
