Skipper's Locker

Jabsco 18786-0001-W Neoprene Impeller, Profile R

Brand:
Jabsco
Part no:
18786-0001-W

Where to buy

Specifications

Material
Neoprene
Blades
9
Outside diameter
4.625 in
Depth (width)
3.5 in
Shaft
1 in
Drive
Double flat
Pumps it fits
Most bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps (per Jabsco; no specific models listed)

The Jabsco 18786-0001-W is a 9-blade neoprene impeller with a plastic insert, Profile R, driven by a double flat shaft. It is a flexible impeller replacement for water pumps. Size is what you match first. Outside diameter is 4-5/8 in, width is 3-1/2 in and the shaft diameter is 1 in. Jabsco says its impellers fit most bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps, but no specific pump models are listed for this part. Neoprene suits engine cooling and fresh or salt water transfer. Jabsco markets its replacement impeller range to recreational boats.

Our take

This suits an owner replacing a worn impeller of this size in an engine cooling or water transfer pump. Pull the old impeller first and compare blade count, diameter, width and drive, since no pump models are listed. Skip it for bilge pumping or water heavily fouled with oil or diesel, where nitrile is the recommended material.

From our buying guide

The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.

Check before you buy:

  • It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
  • You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
  • The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.

See all impellers

Sources