Xantrex PRO XM1000 Inverter, 1000 W Modified Sine
- Brand:
- Xantrex
- Part no:
- 806-1010
Image: xantrex.com
Where to buy
Specifications
- Type
- Inverter
- Continuous output
- 1000 W
- Peak output
- 2000 W
- Battery voltage
- 12 V
- AC output
- 115 VAC, 60 Hz
- Waveform
- Modified sine
- AC transfer rating
- 15 A
The Xantrex PRO XM1000 (part 806-1010) is a performance inverter that Xantrex designs for RVs and boats. It takes 12 V DC in and puts out 115 VAC at 60 Hz, with 1000 W of continuous power and a 2000 W surge rating that lasts 2 seconds at most. The AC output is modified sine wave. It has a 15 A transfer relay rating, and the electronics are conformal coated for moisture resistance. Marine certification matters here: the unit is listed to UL458 with the marine supplement only when it is used with drip shield part 808-1050. If you are putting it in a boat, plan on buying the drip shield with it.
Our take
This suits a boat that needs basic AC for a TV, a laptop charger or other small electronics from a 12 V system. Skip it if you run high-draw loads or gear that wants a clean sine wave, since the output is modified sine and the surge lasts only 2 seconds. Budget for the drip shield, because marine certification depends on it.
From our buying guide
On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.
Check before you buy:
- It can follow your battery's profile, since not every charger can follow a lithium maker's.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.
