Skipper's Locker

Xantrex Freedom X 1000 (817-1000) Inverter

Brand:
Xantrex
Part no:
817-1000

Where to buy

Specifications

Type
Inverter
Continuous output
1000 W
Peak output
2000 W
Battery voltage
12 V
Waveform
Pure sine
AC transfer rating
30 A

The Xantrex Freedom X 1000, part number 817-1000, is a hardwired true sine wave inverter with a 30 A AC transfer relay. It runs from a 12 V DC input and puts out 120 VAC at 60 Hz, with 120, 110 and 108 V selectable. A version with a built-in GFCI is sold separately as 817-1000-11. Continuous output is 1000 W at 40 °C, with a surge rating of 2000 W for 5 seconds. Low battery cut-out is listed at 18.0 VDC. The body measures 340 × 232 × 95 mm without flanges and weighs 5.2 kg (11.5 lb). For boats, it is listed under the UL458 Marine Supplement, which calls for a drip shield (808-1050), and it carries ABYC E-11 and A-31 approvals.

Our take

This suits a boat that needs clean sine wave power from a 12 V bank and already has a shore power setup for the transfer relay to work with. Budget for the 808-1050 drip shield, since the marine listing requires it. The 1000 W rating is at 40 °C, and remote panels or Bluetooth are extra accessories, not part of the unit.

From our buying guide

On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.

Check before you buy:

  • It can follow your battery's profile, since not every charger can follow a lithium maker's.
  • On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.

See all inverters

Sources