Xantrex Freedom SW 3012 150 A 12 V Inverter/Charger
- Brand:
- Xantrex
- Part no:
- 815-3012
Where to buy
Specifications
- Type
- Inverter charger
- Continuous output
- 3000 W
- Peak output
- 6000 W
- Battery voltage
- 12 V
- Waveform
- Pure sine
- Charger output
- 150 A
- AC transfer rating
- 30 A
The Xantrex Freedom SW 3012 (part 815-3012) is a 12 V inverter/charger that puts out a true sine wave. It delivers 3000 W continuous at 40°C and handles a 6000 W surge for 5 seconds. The DC input range is 10 to 16 Vdc. On the charging side it provides 150 A continuous at 25°C. The AC transfer relay is rated 30 A per leg across two legs. The maker lists the unit as approved to UL458 with marine supplement, and for marine use the maker calls for a drip shield, product 808-9004. The maker does not state Bluetooth, built-in solar charging or an ingress rating for this model.
Our take
This suits a 12 V boat that needs 3000 W of clean sine-wave power and a big 150 A charger in one box, with two 30 A legs passing shore power through. Plan on the drip shield the maker requires for marine installs. Its limit is what it leaves out: no stated Bluetooth, solar controller or ingress rating.
From our buying guide
On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.
Check before you buy:
- It can follow your battery's profile, since not every charger can follow a lithium maker's.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.
