Victron Shore Power Cord 25 m 16A/250Vac (3x2,5 sqmm)
- Brand:
- Victron Energy
- Part no:
- SHP302502500
Where to buy
Specifications
- Type
- Cable
- Length
- 25 m
A Victron Energy shore power cord, 25 m long, rated 16 A at 250 V, made from H07BQ-F cable with 3x 2.50mm² conductors. It has a moulded IEC 60309 2p+E plug on one end and a moulded female connector on the other. The cord has an IP56 protection category, and the female connector carries an LED light and a protection cap. The plug is blue, the cable is yellow or black and yellow, and the whole cord weighs 4.3 kg.
Our take
Rated 16 A at 250 V on 3x 2.50mm² cable, this cord caps what you can draw through it at 16 A, whatever your charger or heater could pull. The female end carries an LED light and a protection cap, and the cord is IP56.
From our buying guide
On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.
Check before you buy:
- 33 CFR 183 subpart I applies to boats that have a gasoline engine, except an outboard, so a gasoline generator counts.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.