Victron RJ45 UTP Cable 20 m
- Brand:
- Victron Energy
- Part no:
- ASS030065030
Where to buy
Specifications
- Type
- Cable
- Length
- 20 m
Victron's RJ45 UTP Cable in the 20 m length is a signal cable for Victron systems. It connects Digital Multi Control panels, Inverter Control units and the Interface MK3-USB, and joins VE.Bus devices to one another. It also carries VE.Bus and VE.Can links to a GX device. At 20 m, one piece of cable covers a long run between a control or monitoring unit and the equipment it talks to.
Our take
The 20 m length means a remote Digital Multi Control or a GX device can sit a long way from the inverter on a single unbroken cable. Measure the route through the boat first, since the length is fixed.
From our buying guide
On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.
Check before you buy:
- 33 CFR 183 subpart I applies to boats that have a gasoline engine, except an outboard, so a gasoline generator counts.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.
See all electrical accessories