Victron RJ45 UTP Cable 10 m
- Brand:
- Victron Energy
- Part no:
- ASS030065011
Where to buy
Specifications
- Type
- Cable
- Fits
- Digital Multi Control, Inverter Control, Interface MK3-USB, GX devices
- Length
- 10 m
The Victron RJ45 UTP Cable in the 10 m length is a lead used around Victron control gear. It connects the Digital Multi Control, the Inverter Control and the Interface MK3-USB. It also links VE.Bus devices to one another and makes VE.Bus and VE.Can links to a GX device, so one cable type covers several of the connections in a Victron system. The 10 m length gives room to run it between units that are not side by side.
Our take
At 10 m this RJ45 cable is long enough to place a Digital Multi Control or Inverter Control well away from the unit it serves, and the same lead also carries VE.Bus and VE.Can links to a GX device.
From our buying guide
On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.
Check before you buy:
- 33 CFR 183 subpart I applies to boats that have a gasoline engine, except an outboard, so a gasoline generator counts.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.