Victron RJ12 UTP cable, 0,9 m
- Brand:
- Victron Energy
- Part no:
- ASS030066009
Image: Victron Energy
Where to buy
Specifications
- Type
- Cable
- Fits
- BMV battery monitor
- Length
- 0,9 m
This is the 0,9 m RJ12 UTP cable from Victron, used to link the shunt of a BMV battery monitor with its head unit. The same cable family is made in lengths from 0.3 up to 30 meters. A RJ12 cable of standard length already comes in the box with a BMV monitor. A separate cable like this one is the swap when the supplied lead turns out too long or too short for the installation.
Our take
Cables in this family run from 0.3 to 30 meters, so a 0,9 m cable sits at the short end and is a fixed, known length. Measure the route between the shunt and the head unit before swapping out the lead that came with the monitor.
From our buying guide
On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.
Check before you buy:
- 33 CFR 183 subpart I applies to boats that have a gasoline engine, except an outboard, so a gasoline generator counts.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.