Victron Quattro 48/10000/140-100/100 Inverter/Charger, 230V
- Brand:
- Victron Energy
- Part no:
- QUA481030010
Where to buy
Specifications
- Type
- Inverter charger
- Continuous output
- 8000 W
- Rating in VA
- 10000 VA
- Peak output
- 20000 W
- Battery voltage
- 48 V
- AC output
- 230 VAC, 50 Hz
- Charger output
- 140 A
- AC transfer rating
- 100 A
- Ingress rating
- IP20
Manuals and data sheets
- Quattro manual (PDF)www.victronenergy.com
- Quattro data sheet (PDF)www.victronenergy.com
- Automatic Generator start-stop manual (HTML)www.victronenergy.com
- Connecting other lithium battery systems to Multis and Quattros manual (PDF)www.victronenergy.com
- Dynamic ESS manual (HTML)www.victronenergy.com
- Energy Storage System manual (HTML)www.victronenergy.com
- Solar & Wind Priority manual (HTML)www.victronenergy.com
- VictronConnect configuration guide for VE.Bus products (HTML)www.victronenergy.com
Full data sheet
Victron Energy, part number QUA481030010
Technical
- AC input voltage range (cos(φ) >0.8)
- 187 to 250 V
- AC input frequency range
- 50 to 60 Hz
- AC output frequency ±0.1% (adjustable)
- 50 Hz
- AC output voltage ±2% (adjustable)
- 230 VAC
- Auxiliary AC output
- Yes
- Nominal battery voltage
- 48 V
- Charge algorithm
- Adaptive, 4-stage
- Charge voltage absorption (adjustable)
- 57.6 VDC
- Charge voltage float (adjustable)
- 55.2 VDC
- Charge voltage storage (adjustable)
- 52.8 VDC
- Communication Port
- VE.Bus
- General purpose communication ports (2x)
- Yes
- Continuous power at 25°C (Nonlinear load, crest factor 3:1)
- 10,000 VA
- Continuous inverter AC output power at 25°C
- 8,000 W
- Continuous inverter AC output power at 40°C
- 6,500 W
- Continuous inverter AC output power at 65°C
- 4,500 W
- DC input current
- 235 A
- DC input voltage range
- 38 to 66 VDC
- PowerControl
- Yes
- Fan assisted cooling
- Yes
- ICW (30ms)
- 10,000 A
- Integrated transfer switch
- Yes
- Maximum altitude
- 2,000 m
- Maximum efficiency
- 96 %
- Maximum AC feed trough current
- 2x 100A
- Maximum humidity (non-condensing)
- 95 %
- Maximum charge current (up to 25°C ambient)
- 140 A
- Maximum continuous AC Output current
- 37 A
- Maximum peak AC Output fault current (1 sec)
- 100 A
- Number of AC Inputs
- 2
- Operating temperature range (fan assisted cooling)
- -20 to 60 °C
- Parallel operation
- Yes
- Peak power rating
- 20,000 W
- PowerAssist
- Yes
- Programmable relay
- AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC
- Protections
- Output short-circuit, Overload, High battery voltage, Low battery voltage, Over temperature, AC voltage on inverter output, Excessive DC ripple
- Remote terminal
- On / Off / Charger only
- Battery temperature sensor
- Included
- Three phase operation
- Yes
- Zero Load Power
- 60 W
- Zero load power in AES mode
- 40 W
- Zero load power in search mode
- 15 W
Connections
- Remote terminal type
- Screw terminal two pole
- AC connection terminal type
- M6 bolts
- Battery connection terminal type
- M8 bolts (two for positive and two for negative connection)
- Relay terminal type
- Screw terminal 3-pole
- VE.bus communication port
- Two RJ45 terminals
Enclosure
- OVCIII Icw
- Yes
- Material
- Aluminium
- Weight
- 51 kg (112.4 lb)
- Protection category
- IP20
- Pollution degree
- 2
- Width
- 350 mm (13.8 in)
- Height
- 470 mm (18.5 in)
- Depth
- 280 mm (11.0 in)
- Color
- Blue (RAL 5012)
Standards
- Safety
- EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1
- Anti-islanding
- See our website
- Emission and immunity
- EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
The Quattro 48/10000/140-100/100 is a Victron inverter-charger for 48 V battery banks. It delivers 8,000 W continuous at 25°C with a 20,000 W peak, and its charger can put up to 140 A into the battery. A battery temperature sensor is included. Two AC inputs let it connect to two sources, such as shore power and a generator, and switch to the active one automatically. The unit weighs 51 kg and carries an IP20 rating.
Our take
The 2 AC inputs on this Quattro mean shore power and a generator can both stay wired in, with the unit switching to whichever is live. At 8,000 W continuous and 140 A of charging on a 48 V bank it is a big piece of kit, and at 51 kg the mounting needs planning.
From our buying guide
On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.
Check before you buy:
- It can follow your battery's profile, since not every charger can follow a lithium maker's.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.