Skipper's Locker

Victron MultiPlus-II 24/3000/70-50 2x120V inverter charger (UL 458)

Brand:
Victron Energy
Part no:
PMP242305132

Where to buy

Specifications

Type
Inverter charger
Continuous output
2400 W
Rating in VA
3000 VA
Peak output
5500 W
Battery voltage
24 V
AC output
2 x 120 VAC, 60 Hz
Charger output
70 A
AC transfer rating
50 A
Ingress rating
IP22

Manuals and data sheets

Full data sheet

Victron Energy, part number PMP242305132

Technical

Maximum apparent feed-in power
2,500 VA
Nominal battery voltage
24 V
Charge algorithm
Adaptive, 4-stage
Charge voltage absorption (adjustable)
28.8 VDC
Charge voltage float (adjustable)
27.6 VDC
Charge voltage storage (adjustable)
26.4 VDC
Communication Port
VE.Bus
General purpose communication port
Yes
Programming via computer or app
Yes
Continuous power at 25°C (Nonlinear load, crest factor 3:1)
3,000 VA
Continuous inverter AC output power at 25°C
2,400 W
Continuous inverter AC output power at 40°C
2,200 W
Continuous inverter AC output power at 65°C
1,700 W
DC input voltage range
19 to 33 VDC
Fan assisted cooling
Yes
Maximum AC input current on each leg
50 A
Auxiliary AC output each leg
Yes
Maximum efficiency
94 %
Maximum humidity (non-condensing)
95 %
Maximum charge current (up to 25°C ambient)
70 A
Number of AC Inputs
1
Operating temperature range (fan assisted cooling)
-40 to 65 °C
Peak power rating
5,500 W
Programmable relay
AC rating: 120V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC
Protections
Output short-circuit, Overload, High battery voltage, Low battery voltage, Over temperature, AC voltage on inverter output, Excessive DC ripple
Remote terminal
On / Off
Temperature Sensor
Included
Transfer switch AC current rating
50 A
Zero Load Power
11 W
Zero load power in AES mode
8 W
Zero load power in search mode
4 W
AC input frequency range
45 to 65 Hz
AC input voltage range single phase
90 to 140 VAC
AC input voltage range split phase
180 to 280 VAC
AC output frequency ±0.1% (adjustable)
60 Hz
AC output voltage ±2% (adjustable)
120 VAC

Connections

AC connection terminal type
Screw terminals 21 mm² (4 AWG)
Battery connection terminal type
M8 bolts (two for positive and two for negative connection)
Relay terminal type
Screw terminal 3-pole
VE.bus communication port
Two RJ45 terminals
Remote terminal type
Screw terminal two pole

Enclosure

Width
275 mm (10.8 in)
Weight
22 kg (48.5 lb)
Protection category
IP22
Material
Steel
Height
578 mm (22.8 in)
Depth
148 mm (5.8 in)
Color
Blue (RAL 5012)

Standards

Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, UL 458
Emission and immunity
EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3

The Victron MultiPlus-II 24/3000/70-50 2x120V is an inverter and battery charger in one box for 24 V systems. It delivers 2,400 W continuous at 25°C, is rated 3,000 VA on nonlinear loads, and handles a 5,500 W peak. The charger side is rated for up to 70 A, and the transfer switch is rated 50 A. Output falls to 1,700 W at 65°C. The enclosure is rated IP22.

Our take

The 2,400 W continuous rating holds at 25°C and falls to 1,700 W at 65°C, so the temperature of the install spot directly affects the output you get. The 50 A transfer switch also sets the ceiling for shore power passed through to the loads.

From our buying guide

On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.

Check before you buy:

  • It can follow your battery's profile, since not every charger can follow a lithium maker's.
  • On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.

Sources