Skipper's Locker

Victron MultiPlus 24/2000/50-50 120V Inverter/Charger

Brand:
Victron Energy
Part no:
PMP242200102

Where to buy

Specifications

Type
Inverter charger
Continuous output
1600 W
Rating in VA
2000 VA
Peak output
4000 W
Battery voltage
24 V
AC output
120 VAC, 60 Hz
Charger output
50 A
AC transfer rating
50 A
Ingress rating
IP22

Manuals and data sheets

Full data sheet

Victron Energy, part number PMP242200102

Technical

Communication Port
VE.Bus
Fan assisted cooling
Yes
Programming via computer or app
Yes
Continuous power at 25°C (Nonlinear load, crest factor 3:1)
2,000 VA
Continuous inverter AC output power at 25°C
1,600 W
DC input voltage range
19 to 33 VDC
Continuous inverter AC output power at 65°C
1,100 W
Continuous inverter AC output power at 40°C
1,450 W
AC input frequency range
55 to 65 Hz
AC input voltage range
95 to 140 VAC
AC output frequency ±0.1% (adjustable)
60 Hz
AC output voltage ±2% (adjustable)
120 VAC
Nominal battery voltage
24 V
Charge algorithm
Adaptive, 4-stage
Charge voltage absorption (adjustable)
28.8 VDC
Charge voltage float (adjustable)
27.6 VDC
Charge voltage storage (adjustable)
26.4 VDC
Protections
Output short-circuit, Overload, High battery voltage, Low battery voltage, Over temperature, AC voltage on inverter output, Excessive DC ripple
Zero load power in search mode
4 W
Zero load power in AES mode
8 W
Zero Load Power
11 W
Transfer switch AC current rating
50 A
Three phase operation
Yes
Temperature Sensor
Included
Starter battery charge output
Yes
Starter battery charge current
4 A
Remote terminal
On / Off / Charger only
Programmable relay
AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC
Power Factor
1
PowerControl
Yes
PowerAssist
Yes
Peak power rating
4,000 W
Parallel operation
Yes
Operating temperature range (fan assisted cooling)
-40 to 65 °C
Number of AC Outputs
1
Number of AC Inputs
1
Maximum charge current (up to 25°C ambient)
50 A
Maximum humidity (non-condensing)
95 %
Maximum efficiency
94 %

Connections

Battery connection terminal type
M8 bolts
AC connection terminal type
Screw terminals 13 mm² (6 AWG)
Remote terminal type
Screw terminal two pole
Relay terminal type
Screw terminal 3-pole
VE.bus communication port
Two RJ45 terminals

Enclosure

Depth
147 mm (5.8 in)
Material
Steel
Height
506 mm (19.9 in)
Color
Blue (RAL 5012)
Width
236 mm (9.3 in)
Weight
15.5 kg (34.2 lb)
Protection category
IP22

Standards

Automotive directive
ECE R10-5
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1
Emission and immunity
EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3

The Victron MultiPlus 24/2000/50-50 120V is a combined inverter and charger for a 24 V battery bank. It puts out 1,600 W continuous at 25°C, with a 4,000 W peak, and falls to 1,100 W continuous at 65°C. The charger is rated 50 A, and the AC transfer switch is also rated 50 A. The case has an IP22 protection category, and up to 4 units can run in parallel for more output.

Our take

The continuous rating falls from 1,600 W at 25°C to 1,100 W at 65°C, so how much you can run depends on how hot the space around the unit gets. The 4,000 W peak figure covers short surges above that.

From our buying guide

On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.

Check before you buy:

  • It can follow your battery's profile, since not every charger can follow a lithium maker's.
  • On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.

See all inverters

Sources