Victron MIDI-fuse 60A/32V, pack of 5
- Brand:
- Victron Energy
- Part no:
- CIP132060010
Where to buy
Specifications
- Type
- Fuse
- Current rating
- 60 A
- Maximum voltage
- 32 V
Manuals and data sheets
- Midi, Mega and ANL-fuses, and fuse holders data sheet (PDF)www.victronenergy.com
Full data sheet
Victron Energy, part number CIP132060010
Technical
- Cold Resistance
- 0.9 mΩ
- Current rating
- 60 A
- Voltage Rating
- 32 V
- Approximate voltage drop
- 70 mV
This Victron MIDI fuse has a 60 A current rating and a 32 V voltage rating. It comes as a pack of 5, with Victron part number CIP132060010. Victron also gives its cold resistance as 0.9 mΩ and its approximate voltage drop as 70 mV. Those figures, along with the 60 A and 32 V ratings, are what to compare against your circuit before fitting it in a MIDI fuse holder.
Our take
This MIDI fuse pairs a 60 A rating with a 32 V ceiling and a 0.9 mΩ cold resistance. Victron puts the voltage drop at about 70 mV, so allow for that in the run. Five come in a pack, which leaves spares for later.
From our buying guide
On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.
Check before you buy:
- On a boat subpart I covers, a continuously energized ungrounded terminal needs a boot, nipple, cap, cover or shield.
- Ignition protection on a charger or switch is the maker's statement, so read what it says and which standard it names.