Victron Energy SmartSolar MPPT 150/35 Solar Charge Controller
- Brand:
- Victron Energy
- Part no:
- SCC115035210
Image: Victron Energy
Where to buy
Specifications
- Type
- Mppt
- Battery voltages
- 12V / 24V / 48V (Auto Select)
- Charge current
- 35 A
- Maximum panel voltage
- 150 V
- Bluetooth
- Yes
- Ingress rating
- IP43 (electronic components), IP22 (connection area)
The Victron SmartSolar MPPT 150/35 is an MPPT solar charge controller with a rated charge current of 35 A and a maximum PV open circuit voltage of 150 V. It selects 12, 24 or 48 V battery voltage automatically and reaches 98 % maximum efficiency. Nominal PV power is 500 W at 12 V. Bluetooth is built in, and it works across a -30 to 60 degrees C operating range. The case is IP43 for the electronics and IP22 at the connection area.
Our take
The 150 V open circuit limit and 35 A charge rating define this SmartSolar MPPT, and auto-selecting 12, 24 or 48 V means one unit fits any of those banks. The connection area is only IP22, so keep the terminals out of the wet.
From our buying guide
NMMA says charging sources must meet the charging profile the battery maker recommends. A charger's presets are its own maker's, so set it from the battery maker's figures.
Check before you buy:
- It can follow your battery's profile, since not every charger can follow a lithium maker's.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.