Victron cable linking Smart BMS CL 12-100 to a MultiPlus
- Brand:
- Victron Energy
- Part no:
- ASS070200100
Image: Victron Energy
Where to buy
Specifications
- Type
- Cable
- Fits
- Smart BMS CL 12-100 and MultiPlus
Manuals and data sheets
- Smart BMS CL 12-100 manual (HTML)www.victronenergy.com
- BMS Overview data sheet (PDF)www.victronenergy.com
- Smart BMS CL 12V 100A data sheet (PDF)www.victronenergy.com
This Victron cable connects the Smart BMS CL 12-100 to a MultiPlus. It is a pairing part named for those two units. The BMS at one end is Victron's battery management unit for its LiFePO4 Smart Batteries, built around a 12 V battery and a 12 V alternator. It also has a remote on/off connector, which switches the BMS and the system off from a remote switch.
Our take
The Smart BMS CL 12-100 to MultiPlus pairing in this cable's name makes it a link for one combination rather than a general-purpose lead. Since that BMS is built for 12 V systems, the cable belongs in a 12 V setup.
From our buying guide
On a boat subpart I covers, an electrical component must not ignite fuel vapor around it unless it is isolated from gasoline fuel sources. Ignition protection is the maker's statement.
Check before you buy:
- 33 CFR 183 subpart I applies to boats that have a gasoline engine, except an outboard, so a gasoline generator counts.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.