Victron busbar 250A 2P with 6 screws and cover
- Brand:
- Victron Energy
- Part no:
- VBB125020620
Where to buy
Specifications
- Type
- Busbar
- Current rating
- 250 A
- Maximum voltage
- 70 V
- Connections
- 2P with 6 screws
Manuals and data sheets
- Busbar 250 A data sheet (PDF)www.victronenergy.com
Full data sheet
Victron Energy, part number VBB125020620
Technical
- maximumDC voltage
- 70 V
- Busbar Dimensions
- 6.35mm x 25mm
- Busbar material
- Tin plated copper
- Maximum current
- 250 A
Connections
- Terminal diameter
- 8 mm
- Terminal material
- Stainless steel
- Terminal height
- 17 mm
- Screw terminal material
- Stainless steel
- Screw terminal diameter
- 4.8 mm
- Hex nut material
- Tin plated copper
Enclosure
- Base fire rating
- UL 94 V-0
- Cover Material
- ABS
- Depth
- 70 mm (2.8 in)
- Height
- 48 mm (1.9 in)
- Cover colour
- Black
- Base material
- ABS
- Cover fire rating
- UL 94 V-2
- Base colour
- Black
- Width
- 237 mm (9.3 in)
- Weight
- 0.25 kg (0.6 lb)
This Victron busbar is rated for 250 A at up to 70 V DC and is made of tin plated copper, 6.35mm x 25mm in section. It is listed as the 2P version with 6 screws plus a cover. The bar gives you a common point for battery and DC equipment connections, and it comes with a removable protection cover. The whole unit weighs 0.25 kg.
Our take
A 250 A rating at a maximum of 70 V DC sets the ceiling for what you can hang off this busbar, so total up the loads and charge sources first. The tin plated copper bar is 6.35mm x 25mm and the unit weighs only 0.25 kg.
From our buying guide
On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.
Check before you buy:
- On a boat subpart I covers, a continuously energized ungrounded terminal needs a boot, nipple, cap, cover or shield.
- Ignition protection on a charger or switch is the maker's statement, so read what it says and which standard it names.