Victron Busbar 150A 2P with 10 Screws and Cover
- Brand:
- Victron Energy
- Part no:
- VBB115021020
Image: Victron Energy
Where to buy
View on Amazonpaid link
View on Amazonpaid link
Specifications
- Type
- Busbar
- Current rating
- 150 A
- Maximum voltage
- 70 V
- Connections
- 2P with 10 screws, 4.2 mm screw terminals
This Victron busbar is a two-pole distribution block rated for 150 A at up to 70 V DC. The bar is tin plated copper, 2.4 mm by 19 mm, with 4.2 mm screw terminals and a protective cover. The base is ABS with a UL 94 V-0 fire rating and the cover is polycarbonate. The whole assembly weighs 0.3 kg.
Our take
A 2.4 mm by 19 mm tin plated copper bar carries a 150 A maximum at up to 70 V DC, so the combined load of everything attached to it has to stay under 150 A.
From our buying guide
On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.
Check before you buy:
- On a boat subpart I covers, a continuously energized ungrounded terminal needs a boot, nipple, cap, cover or shield.
- Ignition protection on a charger or switch is the maker's statement, so read what it says and which standard it names.