Victron Blue Smart IP65 24/13(1) Battery Charger, 120V NEMA 5-15
- Brand:
- Victron Energy
- Part no:
- BPC241331124
Image: Victron Energy
Where to buy
Specifications
- Output current
- 13 A
- Battery types
- Lithium, lead-acid, AGM, gel, flooded
- Ingress rating
- IP65
Manuals
- Blue Smart IP65 Charger 120V manual (PDF)www.victronenergy.com
- Blue Smart IP65 Charger 120V manual (HTML)www.victronenergy.com
- VictronConnect app manual (HTML)www.victronenergy.com
Full data sheet
Victron Energy, part number BPC241331124
Technical
- Charge voltage storage
- Normal: 26.4V High: 26.4V Li-ion: 27.0V
- Charge voltage float
- Normal: 27.6V High: 27.6V Li-ion: 27.0V
- Charge voltage Absorption
- Normal: 28.8V High: 29.4V Lithium: 28.4V
- Charge Current Normal Mode (Nominal Value)
- 13 A
- Charge Current Low Mode
- 4 A
- Charge algorithm
- Adaptive, 7-stage
- Bluetooth
- Yes, -4dBm, 2402 – 2480 MHz
- Nominal battery voltage
- 24 V
- Back current drain per month
- 0.7 Ah/mo
- Back current drain
- 1 mA
- AC input voltage range
- 100 to 130 VAC
- AC input frequency range
- 45 to 65 Hz
- Power supply mode
- Yes
- Temperature compensation (adjustable)
- -32 mV/°C
- Standby power consumption
- 0.5 W
- Protections
- Battery reverse polarity, Output short-circuit, Over temperature
- Programmable
- Yes
- Output fully rated up to
- 30 °C
- Maximum humidity (non-condensing)
- 95 %
- Lithium compatible
- Yes
- Efficiency
- 94 %
Connections
- Battery connection terminal type
- Red and black 1.5 meter cable with plugable M8 eyelets or clamps
- AC connection terminal type
- Cable of 1.8 meter (6 feet) with US NEMA 5-15 plug
Enclosure
- Depth
- 240 mm (9.4 in)
- Height
- 75 mm (3.0 in)
- Protection category
- IP65
- Weight
- 1.9 kg (4.2 lb)
- Width
- 140 mm (5.5 in)
Standards
- Safety
- CSA C22.2, EN-IEC 60335-1, EN-IEC 60335-2-29, UL 1236
- Emission
- EN 55014-1, EN-IEC 61000-3-2, EN-IEC 61000-6-3
- Immunity
- EN 55014-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2
Victron's Blue Smart IP65 Charger in the 24/13 120V version charges a 24 V battery at a nominal 13 A. It runs an adaptive 7-stage charge algorithm, is lithium compatible, and is adjusted through the VictronConnect app. It takes a 120 V AC supply through a 1.8 m (6 feet) cable ending in a US NEMA 5-15 plug. The case has an IP65 rating, giving it water, dust and chemical protection.
Our take
The IP65 rating covers water, dust and chemicals, which is the figure to check for a charger mounted where spray or grime can reach it. It delivers a nominal 13 A to a 24 V battery and carries a lithium-compatible setting.
From our buying guide
NMMA says charging sources must meet the charging profile the battery maker recommends. A charger's presets are its own maker's, not the battery's, so set it from the battery maker's figures.
Check before you buy:
- It can follow your battery's profile, since not every charger can follow a lithium maker's.
- Its output suits your bank. ProMariner recommends about 10 percent of the batteries' total amp-hour capacity, with one charger output for each battery.
- It suits how you'll use it, since ProMariner says its waterproof chargers are for batteries not in use while charging.