Victron Blue Smart IP22 Charger 24/16(1) 120V NEMA 5-15
- Brand:
- Victron Energy
- Part no:
- BPC241647102
Where to buy
Specifications
- Outputs (banks)
- 1
- Output current
- 16 A
- Battery temperature sensor
- Optional
- Ingress rating
- IP22
Manuals and data sheets
- Blue Smart IP22 Charger 120V manual (HTML)www.victronenergy.com
- Blue Smart IP22 Charger - 120V data sheet manual (PDF)www.victronenergy.com
- VictronConnect app manual (HTML)www.victronenergy.com
Full data sheet
Victron Energy, part number BPC241647102
Technical
- Protections
- Battery reverse polarity (fuse), Output short-circuit, Over temperature
- Temperature Compensation (adjustable)
- -32 mV/°C
- Temperature Sensor
- Optional (Smart Battery Sense)
- Communication Ports
- Bluetooth
- Nominal battery voltage
- 24 V
- Bluetooth
- Yes
- Can be used as power supply
- Yes
- Charge algorithm
- Adaptive, 6-stage
- Charge Current Night or Low Mode
- 8 A
- Charge Current Normal Mode (Nominal Value)
- 16 A
- Charge voltage Absorption
- Normal: 28.8V High: 29.4V Lithium: 28.4V
- Charge voltage float
- Normal: 27.6V High: 27.6V Li-ion: 27.0V
- Charge voltage storage
- Normal: 26.4V High: 26.4V Li-ion: 27.0V
- AC input frequency range
- 45 to 65 Hz
- Efficiency
- 94 %
- Forced cooling
- Yes
- Lithium compatible
- Yes
- Maximum humidity (non-condensing)
- 98 %
- No-load power consumption
- 0.5 W
- Number of charge outputs
- 1
- Operating temperature range
- -20 to 50 °C
- Programmable
- Yes
Connections
- AC connection terminal type
- Cable of 1.8 meter (6 feet) with US NEMA 5-15 plug
- Battery connection terminal type
- Screw terminals 16 mm² (6 AWG)
Enclosure
- Width
- 108 mm (4.3 in)
- Weight
- 1.3 kg (2.9 lb)
- Height
- 235 mm (9.3 in)
- Depth
- 65 mm (2.6 in)
- Color
- Blue (RAL 5012)
- Protection category
- IP22
- Material
- Aluminium
Standards
- Immunity
- EN 55014-2, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-3-3
- Automotive directive
- ECE R10-5
- Emission
- EN 55014-1, EN-IEC 61000-3-2, EN-IEC 61000-6-3
- Safety
- CSA C22.2, EN-IEC 60335-1, EN-IEC 60335-2-29, UL 1236
The Blue Smart IP22 Charger 24/16 is a Victron mains charger for a 24 V battery bank, with a 120 V input through a NEMA 5-15 plug. It gives 16 A in normal mode using an adaptive 6-stage charge algorithm. Charging goes to one bank only, through its single output. A temperature sensor is optional (Smart Battery Sense). The enclosure is rated IP22.
Our take
With a single output, this 16 A charger serves one 24 V bank, so a boat that also keeps a separate battery bank needs another charger for it. The IP22 enclosure rating is a reason to give it a protected mounting spot.
From our buying guide
NMMA says charging sources must meet the charging profile the battery maker recommends. A charger's presets are its own maker's, not the battery's, so set it from the battery maker's figures.
Check before you buy:
- It can follow your battery's profile, since not every charger can follow a lithium maker's.
- Its output suits your bank. ProMariner recommends about 10 percent of the batteries' total amp-hour capacity, with one charger output for each battery.
- It suits how you'll use it, since ProMariner says its waterproof chargers are for batteries not in use while charging.