Victron Blue Smart IP22 Charger 12/30(1) 120V NEMA 5-15
- Brand:
- Victron Energy
- Part no:
- BPC123047102
Image: Victron Energy
Where to buy
Specifications
- Outputs (banks)
- 1
- Output current
- 30 A
- Battery temperature sensor
- Optional
- Ingress rating
- IP22
Manuals and data sheets
- Blue Smart IP22 Charger 120V manual (HTML)www.victronenergy.com
- Blue Smart IP22 Charger - 120V data sheet manual (PDF)www.victronenergy.com
- VictronConnect app manual (HTML)www.victronenergy.com
Full data sheet
Victron Energy, part number BPC123047102
Technical
- Maximum humidity (non-condensing)
- 98 %
- Charge Current Normal Mode (Nominal Value)
- 30 A
- Charge voltage Absorption
- Normal: 14.4V High: 14.7V Lithium: 14.2V
- Charge voltage float
- Normal: 13.8V High: 13.8V Li-ion: 13.5V
- Charge voltage storage
- Normal: 13.2V High: 13.2V Li-ion: 13.5V
- Communication Ports
- Bluetooth
- Efficiency
- 93 %
- Forced cooling
- Yes
- Lithium compatible
- Yes
- Charge Current Night or Low Mode
- 15 A
- No-load power consumption
- 0.5 W
- Number of charge outputs
- 1
- Operating temperature range
- -20 to 50 °C
- Programmable
- Yes
- Protections
- Battery reverse polarity (fuse), Output short-circuit, Over temperature
- Temperature Compensation (adjustable)
- -16 mV/°C
- Temperature Sensor
- Optional (Smart Battery Sense)
- AC input frequency range
- 45 to 65 Hz
- Nominal battery voltage
- 12 V
- Bluetooth
- Yes
- Can be used as power supply
- Yes
- Charge algorithm
- Adaptive, 6-stage
Connections
- AC connection terminal type
- Cable of 1.8 meter (6 feet) with US NEMA 5-15 plug
- Battery connection terminal type
- Screw terminals 16 mm² (6 AWG)
Enclosure
- Weight
- 1.3 kg (2.9 lb)
- Width
- 108 mm (4.3 in)
- Protection category
- IP22
- Color
- Blue (RAL 5012)
- Depth
- 65 mm (2.6 in)
- Height
- 235 mm (9.3 in)
- Material
- Aluminium
Standards
- Automotive directive
- ECE R10-5
- Emission
- EN 55014-1, EN-IEC 61000-3-2, EN-IEC 61000-6-3
- Immunity
- EN 55014-2, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-3-3
- Safety
- CSA C22.2, EN-IEC 60335-1, EN-IEC 60335-2-29, UL 1236
The Victron Blue Smart IP22 Charger 12/30(1) 120V is a 12 V battery charger with a single output and a nominal 30 A charge current in normal mode. A night or low mode cuts that to 15 A, and the charge algorithm is adaptive with 6 stages. Bluetooth is built in, and a Smart Battery Sense temperature sensor is available as an option. The enclosure falls in protection category IP22.
Our take
The IP22 protection category is the figure to check first: it is a low ingress rating, so the charger wants a dry mounting spot rather than somewhere that gets wet. With one 30 A output, it feeds a single battery bank.
From our buying guide
NMMA says charging sources must meet the charging profile the battery maker recommends. A charger's presets are its own maker's, not the battery's, so set it from the battery maker's figures.
Check before you buy:
- It can follow your battery's profile, since not every charger can follow a lithium maker's.
- Its output suits your bank. ProMariner recommends about 10 percent of the batteries' total amp-hour capacity, with one charger output for each battery.
- It suits how you'll use it, since ProMariner says its waterproof chargers are for batteries not in use while charging.