Taylor Made Super Gard Inflatable Vinyl Fender 5.5 x 20 in, White
- Brand:
- Taylor Made
- Part no:
- 950520
Image: nvnmarine.com
Where to buy
Specifications
- Shape
- Cylindrical
- Diameter x length
- 5-1/2 in diameter x 20 in length
- Maker's boat length
- 15 to 20 ft
- Inflation
- 2 psi recommended
- Valve
- Rubber football needle valve
The Super Gard from Taylor Made is an inflatable cylindrical vinyl fender, 5-1/2 inches in diameter and 20 inches long, in white. The vinyl is marine grade, and the ends are double molded in black for extra strength. Ribbed sides cut down rolling, and a rubber football needle valve is used to inflate it. The maker recommends 2 psi and lists it for boats from 15 to 20 feet, with an eye that takes rope up to 5/8 inch.
Our take
The maker lists this 5-1/2 by 20 inch Super Gard for boats of 15 to 20 feet, and its ribbed sides are meant to limit roll against a dock. Inflate it to the recommended 2 psi; the double molded black ends add strength at the ends.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.