Taylor Made Super Duty Inflatable Yacht Fender, 24 x 58 in
- Brand:
- Taylor Made
- Part no:
- SD2458B
Image: www.overtons.com
Where to buy
Specifications
- Maker's boat length
- Up to 100 ft
- Valve
- Heavy-duty spring actuated valve with quarter-turn lock
The Taylor Made Super Duty is an inflatable yacht fender, model SD2458B, in black. It measures 24 inches in diameter and 58 inches long, and the maker rates this size for boats up to 100 feet. It inflates through a heavy-duty spring actuated valve with a quarter-turn lock. The maker states the webbing exceeds 4500 lbs tensile strength, and backs the fender with a five-year limited warranty. Taylor Made also claims 30% heavier material and 15% higher tensile strength than competing fenders, and 50% more abrasion resistance and twice the tear resistance of the best-selling competitive brand. Those are the maker's figures, not independent test results.
Our take
This suits the owner of a mid-size yacht, up to the maker's 100 foot limit, who wants a heavy fender for regular dock use. Its main limit is size: if your boat is larger than 100 feet, look at a bigger fender. Treat the abrasion and tear claims as the maker's word until independent tests back them up.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.
