Skipper's Locker

Taylor Made Super Duty Inflatable Yacht Fender 24 x 42, Navy

Brand:
Taylor Made
Part no:
SD2442N

Where to buy

Specifications

Diameter x length
24 in diameter x 42 in length
Maker's boat length
Up to 100 ft
Valve
Heavy-duty spring actuated valve with quarter-turn lock

The Taylor Made Super Duty Inflatable Yacht Fender, model SD2442N, is a navy fender measuring 24 inches in diameter and 42 inches in length. The maker rates it for yachts up to 100 feet. The webbing is rated above 4500 lb tensile strength. The valve is a heavy-duty spring actuated type with a quarter-turn lock. Seams are welded with no glue to harden or break down. The fender carries a five-year limited warranty. The same size is also made in two other colors, under model numbers SD2442B and SD2442G.

Our take

This suits owners of larger yachts who want a big fender with strong webbing and welded, glue-free seams, backed by a five-year warranty. The maker gives only a 100 ft maximum and no minimum boat length, so check the 24 x 42 inch size against your own boat before buying. On a small boat it will likely be oversized.

From our buying guide

Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.

Check before you buy:

  • The size is on that maker's own chart for your boat's length.
  • Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
  • You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.

See all fenders

Sources