Simrad HDI Skimmer Transducer, Black, 000-12728-001
- Brand:
- Simrad
- Part no:
- 000-12728-001
Image: unchartedusa.com
Where to buy
Specifications
- Mount
- Transom
- Power
- 600 W
- Connector
- 9-pin
This Simrad Hybrid Dual Imaging transducer pairs a broadband sounder with DownScan imaging to show what lies under the boat. It is a black transom-mount unit that connects through a 9-pin plug. It is rated for 600 watts and 3000 feet of depth. The broadband sounder covers 83, 200, 455 and 800 kHz, and the DownScan imaging side works at 455 and 800 kHz.
Our take
Transom mounting means this transducer fixes to the back of the boat, and its 9-pin connector has to match your display's socket. The 3000 foot depth rating is the number to compare with the water you run in.
From our buying guide
Raymarine's general guidance is 200 kHz for water under about 60 m (200 ft) and 50 kHz for deep water. In-hull transducers avoid a hole, but lose performance and need a solid fiberglass bottom.
Check before you buy:
- The housing suits your hull. Airmar and Raymarine rule out plastic on a wood hull and bronze on a metal one.
- It connects to your display, since an analog transducer needs an interface.
- A through-hull will be fitted to the maker's guide. Garmin says its own should be installed by a qualified marine installer.