Shurflo 380 Bilge Pump, 12 VDC, 380 GPH
- Brand:
- Shurflo
- Part no:
- 355-020-10
Image: Powerboat Supply
Where to buy
Specifications
- Rated flow
- 380 gal/h
- Current draw
- 1.7 A
Manuals
- Installation and maintenance manual (PDF)www.boataccessoriesaustralia.com.au
This is Shurflo's 380 GPH bilge pump, a 12 VDC unit with a nylon housing. It comes with 3 foot tinned wire already attached, which is there for installs below the waterline. The motor is water cooled for longer life, and Shurflo says its bilge pumps are made for the harsh marine environment. A 3 year warranty comes with it.
Our take
The water cooled motor on this 380 GPH, 12 VDC pump is there for longer motor life, and the 3 foot tinned lead is supplied for wiring below the waterline. So it arrives ready to connect for a low bilge position, with a tough nylon housing around it.
From our buying guide
Rule and Johnson both say their bilge pumps are not intended for damage control. Flow falls as the discharge head rises, and the length of the hose, its bends and any check valve reduce it further.
Check before you buy:
- The maker's own table shows the flow at head, since how much a pump loses depends on the model.
- An automatic pump also has a manual switch, which ABYC's voluntary 2005 standard calls for.
- You'll fuse it to the maker's figure.
