Rule 1500 GPH 12V Non-Automatic Bilge Pump, MFG # 02
- Brand:
- Rule
- Part no:
- 02
Where to buy
Specifications
- Rated flow
- 1500 gal/h
- Automatic
- None
- Outlet
- 28.6 mm
- Voltage
- 12V
- Current draw
- 4.8 A
- Safe to run dry
- Yes
The Rule 02 is a 12V bilge pump rated at 1500 GPH. It has a 1-1/8 inch discharge outlet and draws 4.8 A at 12V, so check your wiring and fuse size before you order one. This is a non-automatic model. It has no built-in float, so it only runs when a separate float switch or a panel-mounted switch turns it on. Neither switch comes with the pump. It can run dry without motor burn-out, which helps if the switch sticks on or the bilge empties while it is still running.
Our take
This suits a boat that already has a float switch or a panel switch, or one where you want to control the pump by hand. If you want a pump that turns itself on, buy an automatic model instead. The main limit is the extra switch you must buy and wire in, and the 1500 GPH rating is an open-flow figure.
From our buying guide
Rule and Johnson both say their bilge pumps are not intended for damage control. Flow falls as the discharge head rises, and the length of the hose, its bends and any check valve reduce it further.
Check before you buy:
- The maker's own table shows the flow at head, since how much a pump loses depends on the model.
- An automatic pump also has a manual switch, which ABYC's voluntary 2005 standard calls for.
- You'll fuse it to the maker's figure.
