Renogy Rover Lite 60A MPPT Solar Charge Controller
- Brand:
- Renogy
- Part no:
- RCC60RVRE
Image: www.renogy.com
Where to buy
Specifications
- Type
- Mppt
- Battery voltages
- 12V / 24V / 36V / 48V (auto recognition, non-lithium)
- Charge current
- 60 A
- Maximum panel voltage
- 150 V
- Maximum panel power
- 900 W (12V); 1800 W (24V); 2000 W (36V); 3200 W (48V)
- Ingress rating
- IP32
The Renogy Rover Lite is a 60 A MPPT solar charge controller. It auto-recognises 12, 24, 36 or 48 V non-lithium battery systems, with a battery input range of 9 to 64 V. It takes up to 150 V of solar input, and the maker quotes MPPT tracking efficiency above 99% and conversion efficiency above 97%. Maximum solar input power depends on battery voltage: 900 W on 12 V, 1800 W on 24 V, 2000 W on 36 V and 3200 W on 48 V. Charger presets cover AGM, Gel, Flooded and Lithium-iron Phosphate, plus a user custom setting. It measures 305 x 205 x 99 mm, weighs 3.5 kg, communicates over RS485, has an IP32 enclosure and carries a 2 year warranty. Bluetooth monitoring needs the BT-2 module.
Our take
This suits a boat with a big panel array on a 24 V or 48 V bank, where 150 V input allows longer strings. Check your string voltage first, since one buyer found 150 V too low for four panels. The main limit is the IP32 enclosure: it is not sealed against wet, so it needs a dry, ventilated spot below decks. Bluetooth monitoring also needs the BT-2 module.
From our buying guide
NMMA says charging sources must meet the charging profile the battery maker recommends. A charger's presets are its own maker's, so set it from the battery maker's figures.
Check before you buy:
- It can follow your battery's profile, since not every charger can follow a lithium maker's.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.
