Quicksilver Water Separating Fuel Filter 8M0154752
- Brand:
- Quicksilver
- Part no:
- 8M0154752
Image: www.wholesalemarine.com
Where to buy
Specifications
- Micron rating
- 10 micron
The Quicksilver 8M0154752 (also listed as 35-8M0154752) is a water separating fuel filter rated at 10 microns. It is built to pull water and fine debris out of outboard fuel before it reaches the engine, with over 90% efficiency at that 10 micron rating. It is listed for engines of 115hp and up. It replaces the Yamaha ABA-FUELF-IL-TR and the Sierra 18-7945, so those are the part numbers to match against when you check what is on your engine now. The maker-style advice is to change the filter at least once each boating season, and again before you winterize.
Our take
This suits owners of Yamaha outboards of 115hp and up who want a straight swap for the ABA-FUELF-IL-TR or Sierra 18-7945. Match your engine model and old part number before ordering, because fitment is not stated the same way everywhere. Its limit is that no flow rate or bowl details are given, so it is a poor pick if you are sizing a filter around fuel flow.
From our buying guide
Parker lists Racor's marine Turbine Series for diesel and biodiesel engines, and Racor says gasoline filters in an enclosed location should use a metal bowl. A micron rating means little without its efficiency.
Check before you buy:
- The efficiency is stated with the micron size. Racor labels its finest element 2 micron and rates it at 98% at 4 microns.
- You know your engine's change interval, since intervals are per model.
- You can fit it on the suction side of the fuel transfer pump, where Racor says to install its 900MA and 1000MA, since pumps emulsify water.
