Skipper's Locker

Quicksilver 18458Q3 Water Separating Fuel Filter Kit

Brand:
Quicksilver
Part no:
18458Q3

Where to buy

Specifications

Micron rating
10 micron

The Quicksilver 18458Q3 (listed as 35-18458Q3) is a replacement water separating fuel filter kit. It pairs a filter element with a black screw-in water sensor, so the water warning comes in the same box as the element. The element filters to 10 microns, which gives you a figure to compare against other fuel filters. It is listed for Mercury and Mariner V6 EFI outboards from 1995 and earlier. If your engine is newer, or a different make, this is not the filter for it.

Our take

This suits an owner of an older Mercury or Mariner V6 EFI outboard, 1995 or earlier, who wants the element and the water sensor in one kit. Skip it for newer engines or other makes, since it is listed only for those early V6 EFI motors. Its main limit is the narrow fitment, so confirm your engine year before you order.

From our buying guide

Parker lists Racor's marine Turbine Series for diesel and biodiesel engines, and Racor says gasoline filters in an enclosed location should use a metal bowl. A micron rating means little without its efficiency.

Check before you buy:

  • The efficiency is stated with the micron size. Racor labels its finest element 2 micron and rates it at 98% at 4 microns.
  • You know your engine's change interval, since intervals are per model.
  • You can fit it on the suction side of the fuel transfer pump, where Racor says to install its 900MA and 1000MA, since pumps emulsify water.

See all fuel filters

Sources