Polyform G6 Fender, White, 11 in x 30 in
- Brand:
- Polyform
- Part no:
- 41137889
Where to buy
Specifications
- Diameter x length
- 11" x 30"
- Valve
- Inflation valve
The G6 is the largest fender in Polyform's G Series utility range. This one is white and measures 11 inches across by 30 inches long, with a 7/8 inch eye for the line. The molded wall is ribbed, and the area around the ropehold is reinforced. The G6 has an inflation valve, so you can set how firm it is. Each one is inflated and tested at the factory before it ships.
Our take
The inflation valve on the G6 is the practical feature: you can set firmness to suit the dock or the boat beside you. At 11 inches across and 30 long, with a reinforced ropehold, it is a sizeable utility fender.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.