Polyform G5 Fender, Teal, 8.8 in x 26.8 in
- Brand:
- Polyform
- Part no:
- 11023976
Where to buy
Specifications
- Diameter x length
- 8.8 in x 26.8 in
The Polyform G5 is a teal utility fender from the G Series, measuring 8.8 in across and 26.8 in long. It has a molded-in ribbed body and a reinforced ropehold area, and the maker describes the finish as blemish-free. The G5 is one of the sizes fitted with an inflation valve, which lets you adjust how firm it is. Each fender is inflated and tested at the factory, and the eye diameter is 3/4 in.
Our take
The inflation valve on the 8.8 in G5 lets you tune firmness, which the two smallest sizes in the range don't offer. A reinforced ropehold area and even wall thickness round out a plain utility fender.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.