Polyform G5 Fender, Gray, 8.8 x 26.8 in
- Brand:
- Polyform
- Part no:
- 43628373
Where to buy
Specifications
- Diameter x length
- 8.8 in x 26.8 in
- Valve
- Inflation valve
This is the G5 in Polyform's G Series, a gray fender measuring 8.8 inches across and 26.8 inches long. The series is described as utility fenders with molded-in ribbed construction. The G5 has a valve for adjusting firmness, and the ropehold area is reinforced. Each fender is inflated and individually tested at the factory.
Our take
A reinforced ropehold and an inflation valve are the practical features of the G5: the first backs up the eye the fender hangs from, the second lets you adjust firmness. It measures 8.8 inches across by 26.8 long.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.