Polyform G1 Fender, Classic Red, 3.5" x 12.8"
- Brand:
- Polyform
- Part no:
- 73299793
Where to buy
Specifications
- Diameter x length
- 3.5" x 12.8"
The Polyform G1 is the smallest fender in the G Series, a utility line made in six sizes. This one is Classic Red, 3.5 inches in diameter and 12.8 inches long, with a 3/8 inch eye for the line. The series has molded-in ribs, and Polyform describes the walls as even, with no thin spots or voids. Each fender is inflated and tested at the factory. Only the four largest sizes have inflation valves, so the G1 is not adjustable for firmness.
Our take
At 3.5 inches across and 12.8 inches long, the G1 is the smallest of six G Series sizes. It has no inflation valve, since only the four largest do, so you get the firmness it left the factory with.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.