Skipper's Locker

Mercury Water Separating Fuel Filter 8M0157616

Brand:
Mercury
Part no:
8M0157616

Where to buy

Specifications

Micron rating
10 micron
Replacement elements
Replaces filter element in 8M0157707 and 8M0157708 filter kits

The Mercury 8M0157616 (also listed as 35-8M0157616) is an OEM water separating filter element. It is a canister element supplied with an O-ring for the water sensor plug. It is rated at 10 micron and is made to remove particles, contaminants and water from the fuel before it reaches the engine. It is a replacement element, not a general engine filter. It fits the vessel-mounted filter kit on select Verado outboards, and it replaces the element used in the 8M0157707 and 8M0157708 filter kits. If you are choosing one, those kit numbers and the 10 micron rating are the figures that matter. Check that your outboard and your installed kit match before you order.

Our take

This suits owners of select Verado outboards who already run the vessel-mounted filter kit and want an OEM element for it. Skip it if your boat has a different filter setup, because it is not a universal filter. The main limit is that no flow rate or bowl detail is published, so check capacity against your engine manual.

From our buying guide

Parker lists Racor's marine Turbine Series for diesel and biodiesel engines, and Racor says gasoline filters in an enclosed location should use a metal bowl. A micron rating means little without its efficiency.

Check before you buy:

  • The efficiency is stated with the micron size. Racor labels its finest element 2 micron and rates it at 98% at 4 microns.
  • You know your engine's change interval, since intervals are per model.
  • You can fit it on the suction side of the fuel transfer pump, where Racor says to install its 900MA and 1000MA, since pumps emulsify water.

See all fuel filters

Sources