Mercury 802893T Water Separating Fuel Filter
- Brand:
- Mercury
- Part no:
- 802893T
Where to buy
Specifications
- Micron rating
- 25 micron
The Mercury 802893T, also sold as 35-802893T, is a replacement water separating fuel filter canister for remote mount filter systems. It has a 25 micron rating, so it screens out fine particles as well as separating water from the fuel before it reaches the engine. It fits Mercury outboards with compatible remote mounted bases, plus Mariner and Force outboards with the same base type, and most MerCruiser applications with compatible remote mounted systems. It does not fit 1992 MerCruiser 4.3L Gen II engines with an in-line fuel filter, 1.6L Vazer engines, or 3.0L MPI engines. Sierra 18-7945 is the listed interchange. To fit it, lightly oil the gasket, screw the filter on until the gasket touches the base, then tighten 2/3 to 1 full turn. Check fitment by engine model, fuel filter base style and serial number.
Our take
This suits anyone with a Mercury, Mariner, Force or MerCruiser running a remote mount filter base who needs a straight replacement canister. Skip it if your engine is on the excluded list, and match your base style and serial number before ordering. The main limit is that it does not filter out 2-cycle oil, so it is no help for that job.
From our buying guide
Parker lists Racor's marine Turbine Series for diesel and biodiesel engines, and Racor says gasoline filters in an enclosed location should use a metal bowl. A micron rating means little without its efficiency.
Check before you buy:
- The efficiency is stated with the micron size. Racor labels its finest element 2 micron and rates it at 98% at 4 microns.
- You know your engine's change interval, since intervals are per model.
- You can fit it on the suction side of the fuel transfer pump, where Racor says to install its 900MA and 1000MA, since pumps emulsify water.
