Lumitec Contour Inset Port Navigation Light, Red, White Housing
- Brand:
- Lumitec
- Part no:
- 101847
Image: boaterstop.com
Where to buy
Specifications
- Certified range
- 2 nm
- Rated vessel length
- Up to 50 m (165 ft)
- Supply voltage
- 10-30 V DC
This is the port side red light from Lumitec's Contour inset navigation line, in a white housing. It is made to be set into tops, arches and pilothouses for a flush look. It is Coast Guard approved for a 2 nm range on vessels up to 50 m (165 feet) and runs on 10 to 30 V DC, drawing 67 mA at 12 V and 33 mA at 24 V. The body is rated IP67 and is 1 inch high, so it takes little depth. It is CE certified but not UL certified.
Our take
Drawing only 67 mA at 12 V and 33 mA at 24 V, this inset port light adds very little to the circuit, and the 1 inch height keeps the mounting depth small. The Coast Guard approval is for 2 nm, and there is no UL certification.
From our buying guide
The lights a boat must show depend on its length and how it's being driven. A sailboat under power is a power-driven vessel and shows power-driven lights.
Check before you buy:
- The label gives its visibility in nautical miles, and that range meets the minimum for your boat's length.
- The maker rates it for boats of your length.
- A replacement LED is certified with the fixture it's going into, since the Coast Guard warns that replacement lighting may not meet the rules.