Johnson Pump MC97 Flexible Impeller 2.63" x 2.01"
- Brand:
- Johnson Pump
- Part no:
- 09-703P-1
Image: Go2Marine
Where to buy
Specifications
- Material
- MC97
- Outside diameter
- 2.63 in
- Depth (width)
- 2.01 in
- Pumps it fits
- Quicksilver Model 46-72774 A32
This Johnson Pump impeller, part 09-703P-1, is a flexible MC97 impeller measuring 2.63 inches in diameter and 2.01 inches wide. It is cross-referenced to Mercruiser number 47-59362T and replaces Jabsco 17954-0001. It is listed for the Quicksilver pump model 46-72774 A32. The same family also comes in 2.45, 2.57 and 3.31 inch diameters.
Our take
At 2.63 inches across and 2.01 inches wide, this is one size in a family running from 2.45 to 3.31 inch diameters, so match the diameter to your pump before anything else. The Jabsco 17954-0001 and Mercruiser 47-59362T numbers help you cross-check.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.