Johnson Pump F9 Neoprene Impeller Kit, 12 Blades
- Brand:
- Johnson Pump
- Part no:
- 09-814B
Image: Fisheries Supply
Where to buy
Specifications
- Material
- Neoprene
- Blades
- 12
- Pumps it fits
- F9
This Johnson Pump kit is a 12-blade neoprene flexible impeller made for the F9 pump. It is listed as a replacement for the Jabsco 17936-0001. Johnson says its impellers are built for maximum flow and long life. In its range, neoprene is the material for cooling duty and nitrile is the oil resistant option.
Our take
This is a 12-blade neoprene impeller for the F9 pump, listed as the Jabsco 17936-0001 equivalent, so cross-check that number against your pump. Neoprene is Johnson's cooling choice, with nitrile as the oil resistant alternative.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.
